Subject: Incident w/ EA This Month
From: ACRE NL
Date: 6/27/2001, 7:05 PM


Is this a outboard bearing at the crankshaft or at the prop shaft?
One of my pet peeves is belt/chain PSRUs with no outboard
bearing at the crank, and of course - an inadequately sized,
lubes, aligned, etc. one is at least as bad.  Belts and chains
cause large side loads which seems to be ignored by many
PSRU "designers".

Bill Freeman

tparkes:First tparkes:Last wrote:

I understand it was the outboard bearing on the crankshaft.  I'll confirm that
next time I talk to John Harlow, the builder/pilot.

Tom Parkes

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org