Subject: New cast aluminum 4 port intake manifold.
From: ACRE NL
Date: 6/27/2001, 6:16 PM


Finn Lassen wrote:

What happened to the simple manifold plate (Tracy sells) and 180 degree
bends?

Finn


Won't fit the stock turbo and the 180 bends are more money than the 90
degree
bends.
Not only that it is a six port. Last time I checked. Unless he had
some four port versions  made. You got four port flanges now Tracy?

Paul Lamar


Bulent Aliev wrote:

Paul, 180 degree alum. bends (from Burns Stainless) will fit with the turbo.
I made the flange and the middle two runners are shaped. I misjudged the
size for the outside ones, so I have to go for the 2" tube. The middle ones
are tricky, that's why I was thinking of a single runner. But since I'm not
an engineer, didn't have the balls to go ahead with it? Any Ideas?
Bulent
Cosmo 13-B

Are you sure about that stock Mazda turbo fit Bulent. 89-92? Not the dual 93
and up.
The 89-93 is very tight indeed.

The single runner for the center housing will screw up the tuning.
Now if it is a single runner for front rotor and a single runner for the
rear rotor that might work.



Bulent Aliev wrote:

It's the single 89-92 turbo. After getting one for John Slade I liked it and
got one for my Cosmo. It fits perfect.
The trick with the bends is to cut them before they turn the full 180 degree
into the housing. This way you get more of an oval shape cut to match the
openings and the entrance angle matches the angle of the intake port.
    I didn't think intake tuning plays such a great role in the turbo
installation?

Sounds great Bulent. I still think I will go for the casting.
If you cut the bend before it finishes the 180 you get a slight angular
mis match but it will work I am sure.

Pretty soon we will have turbo's all over the place :-)

Have you guys seen the movie Fast and Furious yet? The star car is a 
third gen RX7. Always whips those econo box Honda's :-) What we need is a
turbo Mazda airplane movie called Fast and High Flying. Greg will
whip all our butts with his HKS, Motec, Greddy, Garret TO4 and all that 
other high tech turbo goody stuff he has :-)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org