Subject: Database/CAD/CNC/INFO/etc - Organizing the community.
From: ACRE NL
Date: 6/29/2001, 8:15 AM


Rich Gillen wrote>Also, Mark has a good idea for
a start, I don't know when he
started this, but he still needs a lot of content/info. He can't collect
it
all by himself. I'm sure it is going to be
a lot of work for him

Wrathall Mark wrote:

Rich, I think some of your ideas have merit, which is why I started the best
practices site. However, there are only around 20-30 fixed wing 13b powered
aircraft which have flown (my estimate) and all have had configuration
diffences. This is inherent in homebuilding, everyone has different
priorities. While a single standardized RV-4 installation for example, would
be of value for many, those pioneers like who have already done it probably
wouldn't have paid the extra money to gain that value. If someone doesn't
want to get involved in the engineering , Powersport is working hard to
deliver a good product tailored to them. For those who only want to avoid
the hard jobs, there is an increasing number of vendors in the community
offering component solutions (Tracy springs to mind). Remember those most
able to nail down standard firewall forward configurations have commercial
interests to protect.

Whether you cut up the stock intake, weld up steel tube bends, beat and weld
aluminuim runners, cast a manifold,  layup a composite manifold, or trade
dollars for time and buy a standard intake from some one else is going to be
a function of your personality and skills. In the end, it really doesn't
matter, as long as the installation is safe, and follows sound engineering
principles.

This is why Bill, Paul and many others keep coming back to AC43-13 and write
essays on bearings etc. This is also one of the principles I am trying to
capture on the best practices site.

The second aspect of the best practises site, is to collect and catalog
known failure modes and how to avoid them. This applies to both the core
engine and commonly used components.

You are correct that that site has a long way to go, and I welcome content
from the community.

Those who have been on the newsgroup for a couple of years or longer, see
that there is a cycle of topics, with a honeing of the knowledge each time
they come back up. This works well, as often we have someone who has flown
the ideas from the last cycle and gives us hard data feed back. Some
conclusion from last year have been proven incorrect. Databasing all
information tends to weight it all equally, whereas in practice many of the
older drawings are of little value.
Mark Wrathall

It is true I have taken a lot of drawings off the web site and replaced them
with newer drawings. 

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org