Hello Charlie:
I just seen an RV8 at the Quad City air show last weekend. It's a real nice 2
seat airplane. About how much is the kit?
snipped
I like the Dragonfly, because it is a cute, cheap airplane, about $9000 for
the kit.
Charlie Kuss wrote:
Rich,
The RV-8 standard kit is $16,000. The RV-8A (tricycle gear) is $16,400. Add
about $8,000 for the quickbuild version. One nice thing about the RV series is that
you don't have to pay the total kit price "up front". The kit is broken down into 4
sub kits. You can start with the empennage and buy the wing kit when you finish the
empennage. Complete price breakdowns can be found at:
http://www.vansaircraft.com/public/kitprice.htm
I have no direct experience with the Dragonfly. However, 2 friends own the
Quickie Q-200. The Dragonfly is very similar to the Quickie. I think (not sure)
that the Dragonfly has better flight characteristics. Quickies have very high
landing speeds (short final at 90 mph), are tricky to land and use up a lot of
runway. My friends are both airline pilots and they have their hands full landing
the thing. This may be a consideration if you are not an extremely good pilot.
I think that one of the Rutan canard (or a variant like the Cozy) aircraft would
be a much better choice, then the Dragonfly. Dragonflies and Quickies have rather
low resale values. There is a reason for that.
Charlie Kuss
The dragonfly or the Q-2 are really single place airplanes for "average" size guys like us.
With the use of non standerd engine installations, you might keep in mind that canards
are not very good for survival in off field landings. Vance
Heck the rotary installations out there are probably more reliable
than buying a used aircraft engine and installing it in your kit
airplane. I will admit at this point in time it is probably
more likely to get a successful first flight installation
with a new air cooled aircraft engine as there are plenty
examples out there to copy.
You will however be increasingly sorry you choose
an aircraft engine as time goes on and you start fixing it.
You will be in for economic masochism of the greatest degree.
For example $290 dollars for a $15 sodium cooled exhaust
valve that probably came out of a truck engine somewhere.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org