Ken Welter wrote:
I build belt drives in ratios from 2.25 to 3.11 the 2.37 has a offset
of 6.75 inches and is a fairly small unit the 3.11 that I run on my
coot has a 11.5 inch offset and is a very large unit but I need that
ratio for this airplane and the offset is good for this plane as for
needing two bearings on the lower pulley I only run one and put 400
hrs on the one that is in my coot now and have had no problems with
it.
Ken, have you considered my idea of mounting the engine lower
and running a real long belt?
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org