Monty Roberts wrote:
Rhino has come down in price! Only $795 now. I haven't looked at the site
in a while. I know some of you are thinking ONLY $795!!! Is this guy nuts?
You have to understand that until the last 3 or four years to get this kind
of capability, you were going to spend well over $20K, just on the
software!!! The hardware could be as much or more! Now with dual gig
processors and the like, plus the ELSA graphics cards, you can get a really
awesome workstation for less than $3K if you build it yourself. It is
getting to where the amateur designer can have access to some truly
professional stuff! (and no I don't get paid in any way by Rhino, but I do
have an interest in seeing them succeed, because I like their product so
much). The only thing missing from my bag of tricks is a good FEA package.
Does anybody out there know of a good less than $1000 FEA package?
Monty
Monty Roberts
RMI
1795 Berry St.
Fayetteville, AR 72701
tmrbrts@swbell.net
NE/NASTRAN is looking pretty good but you need a decent pre-post processor.
They recommend FEMAP which I have never used. But the combo is more like
$4-5K, depending on options. This is cheap and my current 1Ghz PC with 256 Mb
of ECC, 30 Gb disk, Elsa video, etc. is nearly a serious workstation. And
I use
a 128 processor Cray/SGI Origin 2000 at work, so I have a serious reference
point.
Higher end home PCs are actually pretty serious computers these days. I
used to
spend $75K on a TERMINAL! My PC is about 1/3 of a $5 million Cray Y-MP2e
of 11 yrs ago, performance-wise.
If I could pick up enough consulting work to swing the software, I think I
could do
some pretty good work with Noran Engineering NASTRAN, at least based on the
example probs on their web site.
Bill Freeman
Long EZ builder & pilot
BSME, MSME
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org