I ordered these bends this morning. They are about half
the cost of Burns Stainless.
They average about $11 each which is about half the cost
from Burns.

Still a lot of money for an intake manifold.
A casting would be cheaper and not require so much welding 
if it were not for the cost of the pattern.

R & B Wagner, Inc. Since 1850
Railing Systems and Components                                                    Architectural Fittings and Custom Bending
4480 North 124th Street; Milwaukee, WI
P.O. Box 423; Butler, WI 53007
1-800-786-2111 · 414-461-2111
FAX: 414-461-5124

6061 pipe

Qyt                 Part #             Pipe

2   one inch inside radius 290-2  90 degrees  1-1/4   1.66 OD
2   one inch inside radius 362-2  90 degrees  1-1/2   1.90 OD

2   two inch inside radius 293-7  90 degrees  1-1/4   1.66 OD
2   two inch inside radius 365-3  90 degrees  1-1/2   1.90 OD

4   two inch inside radius 281-2 45 degrees  1-1/4   1.66 OD
4   two inch inside radius 353-2  45 degrees  1-1/2   1.90 OD

If you live in these states you can order direct.

oregon
nc
fl
wash

I had to order from:

Distributor  McNichols  Cerritos CA (562) 921 3344


Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org