Bulent Aliev wrote:

Hi Paul, I took couple of pic's for you to see the clearance between the
Ubends from Burns and the way I shaped the two runners on the middle and the
flange I made more or less by hand. I have to buy 2" tube bends to cover the
outboard intake openings.

Looking good Bulent. Lot harder when you get it right down on
the tops of the rotor housings.

That flange might warp when you weld it. You might have to make a thicker
one.

first picture.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org