Subject: Wee Willy Wobbly Wankel Demonstrater
From: ACRE NL
Date: 7/2/2001, 2:57 PM


I was there. What time did you come by? Perhaps I was at the hardware
store. I left about 2:30.

Paul Lamar

vjaqua wrote:

I was there  in your area between 11 and noon - chatted a bit
with the fellow on the end building an RV 8. Alex was also
not in sight nor Klaus, at that time. I hope you got to see
the Diesel run - can,t you just see yourself in an open
cockpit pouring the cobs to that thing. This is the first
time I had seen a complete one close up. This is
another 4 stroke with only one valve - like the Packard
and the Monosoupape rotary of WWI -Vance

I guess I was in the hardware store.
I wish I knew about it. I would have walked down and taken a look.
Where is it based? What brand is it if not a Packard?

Paul Lamar

It was a Guiberson, originally designed as an airplane air cooled radial
but mostly used with a flywheel fan and shrouding in tanks and boats during
WW II
It was part of the display set up by the Topa Topa Flywheelers, mostly
known for their tractors and old stationary engines. It was over by
the tractors and cars (and Tracy Saylor) - Vance

Sounds like it would have made a good mystery engine.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org