Subject: New cast aluminum 4 port intake manifold.
From: ACRE NL
Date: 7/3/2001, 9:16 PM

George Lendich wrote:

Looks great Neal. Perhaps a bit too long. Looks like it
will work real well for a normally aspirated Kis Cruiser.
I think you will have to move that oil filler neck and shorten
the tubes to a total of 18 - 24 inches. Also you could use a plenum
and one larger throttle body if you wanted. You would still
need four injectors. Don't forget a nice radius lip on the tubes
where they join the plenum. Worth 5% more HP.

BTW I hope you are planning on using a 2.85:1 PSRU as I think
you will need the extra RPM and consequent extra HP with a NA 13B
Kis Cruiser.


Paul Lamar
Paul,
On the Plenum, would it be feasable to run tubes through the plenum,
top to bottom. to accommodate the filler neck and dip stick.
Just seems the simplest thing to me !.
George (down under)

Yes. That would work. I think one would have to pipe tap the cast iron
center housing where the oil filler pipe is pressed in now and screw
in a new oil filler pipe through the hole in the plenum.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org