This is on the V8 Lancair Tigress
Paul Lamar
Paul,
I understand the advantages of side exhaust from a plumbing standpoint, but I
am still concerned on the KIS design with having the exhaust stream flowing
by the door seals. Having just put together my doors, and the fact that the
total seal overlap is at max 1/2", I think most of the flying planes tend to
leak air around the door.
the bottom exhaust gets the CO away from the pilot and any air leakages.
Bill Schertz
KIS Cruiser #4045
That's true Bill but I think the seal either can be improved or
a turbulator mounted on the fuselage in back of the
exhaust just a ahead of the seal that will mix and dilute
it better with the air stream. Also the pipe could extend out in the
air stream further. I also think it is the lessor
of the two problems. I intend testing and flying with a CO
monitor. If worse comes to worse I will seal the pilots side
door. Pipers have been getting along with one door on the
pax side for 50 years.
I am certainly going to give it a try as I think I can solve
what ever CO problem arises.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org