Subject: The how not to do it web site.
From: ACRE NL
Date: 7/5/2001, 3:06 AM

http://www.sdsefi.com/air11.html

"Specs on the stock EJ22 are hp-130@5400 rpm and peak torque 137ft/lbs.@4400 rpm. Compression ratio is 9.5 to 1. The stock turbo version puts out
160hp@5600 rpm and 181ft/lbs. at only 2800 rpm. Compression ratio is 8.0 to 1. My targets on the modified engine are 220 hp at 5500 rpm (takeoff) and
165 hp at 4250 rpm for max cruise. These numbers should be easily obtained at low boost pressures (40 and 36 inches respectively) with several
modifications to improve engine airflow and a far more efficient turbocharger and intercooler system. The factory system is poorly matched for constant
high power use. The fuel consumption target is .4 lbs./hp/hr. This will be helped by raising the compression ratio back up to around 9.5 to 1 for increased
thermal efficiency and should be safe when burning 100LL."  

Detonation city :-) This guy ain't got a clue.

"I will be constructing a lightweight steel tube intake manifold mounting 4, 390cc/min. Bosch injectors and the factory 60mm throttle body. The exhaust
headers will be built from .065 wall 1.75 inch OD 321 stainless tubing and mount the Garrett Super 60/ Stage III/.81 TO3 turbocharger. A very efficient
Spearco intercooler will take the compressed air back to near ambient temperatures."
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org