YES!! now I have two ways to go and I like both of them. The P-47
version is sooooo easy. And it does not add one bit of drag. The
stock cowl has an intake tunnel to the carb. I could enlarge this to
get sufficient capacity and just run it all the way back. This works
well with the Tailwinds shape and structure. The tunnel aft of the
fire wall would be in the wind shadow of the bottom of the cowl.
The regular cooling intakes could be eliminated. I will get the
rad asap and get it mounted, Then I will mock up the various intake
schemes and have a look. I should have my drive in a month. With it
installed, the cowl can be developed. Things are started to roll.
I have read on this list that the thinnest rad cores were the most
efficient. I based my rad design on 1" tubes in two rows. In one
of your recent statements, you recommended using 1.25" tubes as
these would flow better. I can choose between a 20" square 1" two
row or an 18" sq 1.25" two row. They are roughly the same
capacity. Which would you recommend? Thanks, Jerry
Jerry
I would not exactly say it does not add one bit of drag.
The frontal area of the aircraft is increased and there
is skin friction inside the tunnel. The frontal area of
an aircraft is defined as the max cross sectional area which
does not necessarily occur at the front of the aircraft.
It is going to make the Tailwind look a bit more like
a Howard DGA.
More like Chuck Dunlop's beautiful cowl, just a little smaller. I
have not heard back from Griffin yet. What is the size of Chuck's
inlet? --Jerry
I think he is changing it as we speak. What is the new size
going to be Chuck?
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org