Subject: Ed Anderson health
From: ACRE NL
Date: 7/10/2001, 2:30 PM

Ed Anderson wrote:

Doing just fine, Paul

    Thanks for asking,- but was I suppose to be feeling other than "fine"?
In any event,  reports of my demise are greatly exaggerated{:>).  Flew down
to Columbia SC last Saturday to see four RV's under construction. Nice
workmanship (one gal building as well).   Had to make a max rate (full
power) climb out  on a 97F day (Noise abatement) to 2500 MSL.  Oil temps hit
210F and coolant 220F during climb, but noted that coolant pressure remained
at 10 psi.  Back down after level off to 190F and 195F respectively.
Interesting on the coolant pressure, because during a ground run up on a hot
day the pressure will build to 20 psi while coolant temp sits at 190F.
Would have expected coolant pressure to be as high or higher during such a
climbout.  Sure gets hot under a bubble canopy on a hot muggy day..

  Been busy working on a design for a fuel totalizer for Tracy's EC2 that
should cost around $25 in parts and no messing with sticking a sensor in a
fuel line.  Got in the que for one of Jon's 4 port flanges.  Going to dump
this stock lower manifold of a boat anchor.

  Never heard any more on the  manometer for measuring cowl pressure.

Been chatting with Laura Crook about SouthEast flyins we plan on attending
this fall including - of course- the one at Shady Bend.   I presume you are
getting ready to head out to Oskhosh - I understand Tracy will be departing
for Oskhosh around 20 July.

   How about yourself?   looks like your mount and engine compartment is
coming together.  Does the FAA inspection mean you get to fly your 182 soon?

Best Regards

Ed  Anderson

Well I would not say that given the FAA track record so far :-)

I am making a side trip to Arlington Wash  before OSH this week 
with a visit to Perry and Ken Welter.

Did you get my mag article?

The manometer water won't hurt you Ed :-)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org