Subject: PSRU plate motor mount.
From: ACRE NL
Date: 7/10/2001, 11:55 AM

Wrathall Mark wrote:

Paul wrote>Depending on how well you design the center housing rubber
bushing brackets it could be a wash.

Mark wrote> Kind of hoped this would be the result. 3-5lbs is a fairly
generous weight allowance for two brackets and the bushings. Hope you don't
mind me bouncing the ideas for this. When I first saw your mount design
ideas a couple of years ago I didn't get it. Too hung up on hanging the
engine off the rear housing like the LyCons. Seeing those two simple tripods
on your Cruiser compared to the complicated bridge trusses often used has
been educational.

Do you know why aircraft ever ended up with four point mounting, when three
is enough? I can't see much value in redundancy when the rubber is the
limiting part and all rubber parts see the same environment. Damage
tolerance for weld cracks? Large turbines are hung off two mounts (be it
with fail safe links)  and allow to move around a fair bit.
Mark Wrathall

I cannot get in the minds of the designers but I will bet it is a 
tradition that dates back years and years :-) It does give a bit of
back up.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org