Subject: PSRU plate motor mount.
From: ACRE NL
Date: 7/10/2001, 2:29 AM

I also forgot to mention the effect of thrust on the rear
mount load. Looking at the engine from the left side the thrust
line is above the rubber bushings by several inches.
Assume 500 pounds of thrust so there will be a 1500 inch
pound counter clockwise moment in the vertical plain.
Since the rear mount is 18 inches aft the moment load
will be 83 pounds UP on the rear mount. 83 pounds up
minus 55 pounds down is a net load of 28 pounds up
on the rear mount. The loads are low back there.

Jim Griswold the originator of this idea was and is a 
genius designer.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org