Subject: Stacking heat exchangers -> Good idea or bad idea?
From: ACRE NL
Date: 7/11/2001, 9:14 AM


Yes I assumed that would be done. Most car makers are real cavalier
about ducting. If they ever figure it out and start to
use a Kuchemann and Weber proper duct watch out... :-)

"Brian D. Cain" wrote:

You got that right, Paul.  Last night, while hangin' out in the garage
taking some
of this stuff apart, I got a real good look at where the air can potentially
travel
off to from the starting point of that inlet in the front bumper skin:  it's
got about
5,000 different 'way-outs' from both the headlights, over and above the
radiator
(just underneath the hood), and all sorts of other places.

Per talking with Jim, I'm thinking about getting some cardboard and
duct-tape
and experimenting with ducting the air through the cores, closing up all
points of
escape and testing to see what happens.  There's quite a few of them.

It amazes me the NASCAR guys have not appeared to catch on yet.
I had a talk with Ron Davis a few weeks ago about this and he
has a lot of NASCAR contacts so perhaps we will be seeing some
improvement in the near future.

Brian seems to be with it as far as data taking is concerned.

I'm using an EFI system that can datalog these things as well as
stand-alone,
external gauging in the cockpit.  I watch all of this stuff (and boy am I
glad
I've got the numbers...)

By the way, what do you guys use as far as EFI systems?  I've been using
a Haltech E6K for 15 months now, on this engine, and I must say that I am
_extremely_ impressed with it.

B

Heck back in the old days we used to mock up aerodynamic
changes with foam, cardboard and duct tape and drive 150
MPH for testing :-)

Most of us buy our EFI systems from Tracy Crook. His unit is designed
specifically  for aircraft use.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org