Subject: Perry's new motor mount
From: ACRE NL
Date: 7/14/2001, 11:59 PM

This is the rubber bushing in the composite fire wall trick.
It distributes the stress in the fire wall much much better
than any bolted joint ever could.

For all you Cozy builders using this kind of motor mount. Have 
no fear guys this is going to work gangbusters.

These are large Barry 2003's rubber bushings which means 
the 5/8 bolts holding it on could hold the Space Shuttle to 
its main fuel tank :-) You could probably drill a 7/16 hole 
all the way through these bolts to save a bit of weight. 

Perry did an excellent job of designing this.
The brackets on the right side are simple strips
of sheet steel bolted to the engine under the pan
using the pan bolts themselves. Neat and simple
bracket on the left side bolted to a 2nd gen center
housing.

Same thing for the front mount.

This is the test stand and mock up in case you were wondering.
 
Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

new-mount-RS.jpg

new-mount-LS-bracket.jpg

new-mount-back-side.jpg