George Lendich wrote:

John Slade wrote:

I notice the maximum pressure recovery is .86 for these ducts.

What does that mean to us in real terms?
John Slade, Cozy MKIV #757, progress: http://kgarden.com/cozy
West Palm Beach, FL

That means if you are going 100 MPH the dynamic pressure is
26 pounds per square foot or .18 psi. So 86% of the that is
.15 psi. It is 86% of what every the dynamic pressure is.
That is why ducts are described in pressure recovery terms.

Paul Lamar

Paul,
I have been looking at those NACA ducts and it seems to me to be somewhat of
a bell shape.
Your comments ?
Would this shape be good for exit ducts also !?
George (down under)

I don't think so. The whole idea of a NACA duct was to deal with a 
boundry layer and you don't have a boundry layer when the 
air exits the rad.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org