Subject: Of counterwieghts and kings
From: ACRE NL
Date: 7/15/2001, 8:56 AM

Rick Girard wrote:

As I have learned that virtually every Ross PSRU is unique there may be
several answers to this one.  Gave my engine to the shop to disassemble
and give me a condition report.  They sent me home after said report
with the gearbox and a box of parts.  New engine was precision balanced
and is awaiting assembly.  Yesterday I looked in said box and found that
engine was driving through an automatic transmission flex plate and
counter balance was in the box, not with balanced rotating parts at the
shop.  Ross did a crappy job of drilling mounting holes for damper
assy., putting one hole so close to a stock Mazda hole that a crack is
guaranteed, so flywheel has to be replaced anyway.  Did Ross, or anyone
else, use a stock clutch flywheel, or after market aluminum flywheel,
and eliminated the counter balance?  If the issue with the clutch
flywheel is clearance inside the bell housing, I can make a spacer
plate.  If the issue is weight, I can make an aluminum flywheel or
machine stock part to remove material and save weight (did this for a
local Model A builder who wanted a faster revving four banger).  Thanks
to all in advance.

Rick Girard

I had a real long fruitful talk with Ken Welter about a lot of things.
Ken has years of experience with the rotary and is willing to try
a lot of things that would be dangerous to try in something
other than an amphibian.

Ken had a lot to say about Chris Ross. Whatever you do don't
send Chris anything let alone money. You may never see it again.
The bottom line is you are now on your own unless somebody new 
starts up a business servicing Ross gear boxes. 

Ken also stated that the torsional damper Ross used is an off the shelf 
damper for boat gear boxes or prop Shafts. It comes in three 
stiffness varieties. Ken destroyed at least three
of them what with feeding nitrous oxide to the engine on a regular 
basis. My suggestion is; don't use it at all and make up  something
like Tracy uses with rubber bushings for your Ross box.

BTW ken told me Everett Hatch got the idea of using nitrous oxide
from him :-)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org