Hey Mike,
Great cowl! If your bird flys as fast as its gonna look with this set
up, you should have no problem getting 250 MPH {:>)! Opening on top looks
like either for the engine air intake or perhaps air to your oil cooler?
Should be a high pressure area for most regimes of flight.
Ed Anderson
Mike Wills wrote:
Ed,
Thanks. I think based on what I've seen for pressure distribution plots
on other aircraft (never seen one for an RV4) that this NACA duct location
is in a relatively low pressure area. Particularly when I need it most, at
high AoA during climb. But I couldnt come up with a better location for an
inlet that would still give me a relatively decent duct back to the
firewall located oil cooler. Thats why I decided to add a second oil cooler
in the chin scoop. Maybe I'll be pleasantly surprised and have too much oil
cooler capacity.
Mike Wills
I think the pressure will be near neutral Mike with good velocity and a thin
boundary layer. The NACA duct should work great.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org