Subject: Thought you would find this info on Mechaniar interesting
From: ACRE NL
Date: 7/16/2001, 11:34 AM
CC: rotaryengine@mecanair.ch


Ah so I think you are correct Mark.
The engine is the real easy part. Unless they provide fire wall
forward intercooler and cooling packages for popular kit air planes
it is going nowhere. They have addressed the motor mount issue well.

Why is it that Mechanair can build a dynofocal mount to the rear plate
on theirs, and it doesn't work on the 13b?  I think general acceptance
of the 13b would come much sooner if we could make the 13b  a bolt on
replacement for the 0-320 and O-360.  Of course there are lots of
systems that have to be replaced (radiators, ignition, electrics, etc
etc) but the bolt on to the same mount, putting the prop flange in the
same place as the O-360 sure would help...

Besides, it would make my life easier when I want to put a 13b in my
Cozy.... :-)

=====
Kevin Russert Walsh
Sr. Process & Equipment Development Engineer

The whole rear cover is an entirely different casting. Read big bucks.
Actually I think they should start selling that kind of stuff
including the bell housing and the PSRU.
Good for us and good for them as it would generate a bit
of immediate cash flow for them.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Mecanair-psru1.jpg