Subject: Bruce Frank oil pans
From: ACRE NL
Date: 7/21/2001, 7:37 PM

Here is a pan Bruce Frank made for me.

bafrank@worldnet.att.net

A real reasonably price $150. You drill the holes.
If you go up on the base plate thickness to 1/4 or 5/16 inch
thick you could probably do a Tracy Crook style motor
mount with little increase in cost.
Bruce says make the the rest of it out of 1/8 and it
will be easier for him to weld. The weight is around two pounds
orabout a three pound weight saving over the stock steel pan.

I designed it like this to give me plenty of room
under the engine for my rad. More pictures on Monday
when I get it and the rad installed.

If you need help drawing your custom pan let me know and I will
do the drawings for you based on your needs and ideas.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

oil-pan-welded.jpg

OILPAN3.GIF

BACKPAN3.GIF