Here it is with the rad mounted under the engine.
Now you know why I went to all that trouble on the motor/psru
plate with the built in motor mounts and the new custom oil
pan. Mainly to give room under the engine and within
the cowl for one rad big enough to cool 250 HP.
The rad core is 15 by 19 by 2 inches thick.
The filler neck at the front of the Howe Chevy rad will be cut off.
In fact I am cutting off the entire front tank and will
weld on a new contoured one that takes less room. The rad
will be converted to a double pass with inlets and outlets
on the back end. Might be easier to specify this core and have
Howe or Griffin supply a double pass.
Next comes the foam male mold for the rad scoop. I will test
the finished scoop on the Dodge Caravan mounted sideways in
the open sliding door. I have a digital wind speed meter that I
can survey the flow all over the back side of the rad from inside the
Caravan. The rear windows of the Caravan open like cowl flaps :-)
I could also use my free furnace squirrel cage blowers.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org