Subject: emergency fuel pump shut-off]
From: ACRE NL
Date: 7/22/2001, 7:40 PM


Robert Darrah wrote:

OK, a question for the group:  Is anyone installing a system that, in the
event of a minor crash would turn off the fuel pump?

A way to do this is wire the pump in series with a oil pressure switch that
has a by-pass switch for starting.  Or does this just add failure prone
components to a simple system.  But I sure would like that pump to stop if I
end up with the prop in the dirt!

Any ideas?

Bob Darrah

Ken Powell wrote:

Bob,
This problem has also occurred to me but I haven't settled on a solution yet.  Here is how I see it:
1.  If you use a Master switch, then the pump switches should be wired thru the Master.  If you remember ALARM
from your training days, then the Master is the last thing to be turned OFF after lowering the flaps.  However, the Master switch is another possible failure mode.
2.  I do not trust the switches used in autos for this purpose.  We do not know how they would act in turbulence, etc.  I don't think that I will use one of these unless they have been proven to be safe (by someone else, I might add).
3.  What does Bob Nuchols say?  Always good advice.
4.  What do Ed Anderson and Tracy Crook do?  How about it guys?

Of course, the big problem here is the accident that happens suddenly and you do not have time to go thru your checklist.  I'm not much help - I'm also looking for a better solution.

Ken Powell
kenpowell@aristotle.net

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org