Subject: .PSRU oil filter
From: ACRE NL
Date: 7/23/2001, 12:21 AM


marc wiese wrote:

 How about a review of this design, Paul? Perhaps they would be interested
 in a conversion to the Mazda using a straight thrust line and 3.x gear
 reduction?
 http://www.epi-eng.com/PSRU_Specs.htm


It obviously works as there are quite a few Engineair V8 conversions
flying. Ideal for an upright V8 as the six or so inches offset puts
the prop up near the top of the engine. For a rotary it would waste
a lot of valuable space in the cowl. Also it is quite heavy
at around 73 pounds. There is no beating a planetary in torque
capacity to weight ratio.

One nice feature is the separate gear box oil pump. Several
rotary engines have failed after a Ross
gear box has come apart due to gear box metal particles
contaminating the engine oil supply. It happened to Ken Welter
at least once. Ken suggest a screen filter from a motor cycle
engine to filter the oil from the gear box before it flows back
into the engine sump. He told me what kind to use but I forgot
the name. Ken? Help :-)

I would also devise a metal particle detector on the oil drain
plug wired to a light on the instrument panel.
Paul Lamar


>From Ken Welter

The filter is a Racor was Oberg but Racor bought them out and they
make a small motor cycle filter that has different screens and has a
bypass switch to let you know the filter is plugged.

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org