Andy Hecker wrote:
Paul,
Mr. E-Racer is Shirl Dickey. The E-Racer MK-1 was designed specifically
for (initially) an aluminum 215 V-8 on the CG, feeding the marine Z-drive
via a driveshaft. (Designed to be water cooled, the drive ran much cooler
with a 1/2 quart of synthetic gear lube splashing around.) The MK-II was
designed for a lyc O-320 on the firewall ala Cozy/Velocity.
The prototype E-Racer landed off-field on the way to OSH '88 when an
electronic tach died and took the single ignition system with it. The only
other serious problem was the fire during the 1990 Jackpot, NV Rutan and
Composite Enthusiasts (RACE) event. He and Jeana Yeager landed and were
unhurt after a newly designed (but unshielded) exhaust system, red hot from
racing, ignited the foam structure aft of the engine. Take a look at the
March '92 KITPLANES, or E-Racer Newsletter 14 here:
http://www.eracer.org/newsletter/eracernewsletter14.html
I don't think he swore off auto engines, tho. He wasn't a fan of the
rotary due at least to their "excessive fuel burn", but more likely because
he came from a piston engine background - drag cars and race boats (12 years
in SK flat bottom boats). He designed the airplane specifically to go after
the Downey award for 'other than air cooled engines' in the Oshkosh 500 race
and came out better in the race handicap with a side-by-side piston powered
airplane. He repaired the airplane after the fire, but later replaced the
215 (bored to 289) aluminum V8 with a turbo-charged Chevy 4.3 liter V6 which
he continued to fly.
Andy Hecker
E-Racer 257 (on hold for another military move)
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org