, BUT - if you connect the switch such that a lack of oil pressure
will defeat the fuel pump, are you setting up a situation where if the
engine stalls for some reason, you will have no fuel to re-start??
Al.
Robert Darrah wrote:
You will have to have a by-pass switch to start the engine in the first
place,
same switch for restart. But there must be other ways to shut off the
pump,
someone must have a better idea. Let's hear it!
Bob Darrah
I put considerable thought into making my electrical system as reliable and
foolproof as possible. Anything that shuts the fuel off automatically
defeats my design philosophy. My plan is to shut off the fuel 100 ft or so
before an emergency landing. I know it would be hard to remember under
stress but if you play out the scenario in your mind a few times maybe you
would remember.
Having said all that, maybe you could mount a mercury switch at a 45 angle
and connect it across the fuel pump so that under impact it would short out
the pump and pop the breaker. If you use a breaker and not a fuse, you could
reset it if it ever activated unintentionally.
Chuck Dunlap
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org