Marine switches exist for this purpose. Two contact sets are in the
housing.
One set feeds current from the normal ignition circuit to the fuel
pump. This
contact is closed only when the oil pressure is above a certain
threshold (7
psi IIRC). The second contact set provides a means to energize the fuel
pump
during cranking by feeding current from the starter solenoid. This contact
set is opened when oil pressure reaches the threshold. Opening this contact
prevents the fuel pump circuit from energizing the starter motor. These are
cheap switches (in both senses of the word), and I have seen a few
failures.
Not recommended for aviation IMHO. Perhaps a similar arrangement could be
wired with more robust switches.
Jon Lauter
Rotary Power Marine Corporation
marc wiese wrote:
FI cars use a magnetically operated impact switch of some sort (DOT
mandated for crash protection). Maybe like the ELT switches? I had one fail
and could not start the car so I jumpered it out.
I agree a way must be found to disable the pumps in case of an accident!
Very bad if the pumps keep pumping fuel-
Marc
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org