Hello group,
I was happy to find the my 20B engine has a dual thermostat and thought I
would share a pic with the group. This seems like a good idea just in case
on sticks. The other will still work thus allowing 1/2 the normal flow.
Failure of one might be picked up by an increase in coolant pressure above
the baseline since the flow path would be reduced by 1/2. Any ideas on this??
Don Mitchell
No pic Don but please send them as jpg if you can.
That is not the reason they have two. If any one of the two
fail you have serious problems. It is much lower aerodynamic drag
to control the temperature of the engine with cowl flaps anyway
instead of thermostats. My suggestion is take them out
and block the bypass passages. Again there is a lot of info
on the ACRE NL Cd on this subject.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org