Paul et all,
With the near-demise of Ross, the non-approachability of Marcotte, and the
acknowledged leadership of Tracy Crook and the Powersport designs currently
out there for Mazda rotary engines, might it be possible to find who
would/might be interested in purchasing a psru that has capability of, but
can be sold with or without the following [as the basic design will be
standard (all this is preliminary)]:
1. hydraulic cs operation
2. hydraulic pad mount AND INTEGRAL GEAR DRIVE for STANDARD 210xxx-type
WOODWARD governor
3. integrated mount-mount provisions on cast bellhousing
4. suitable bolt on cast bellhousing for 12B/13B standard tranny rear
housing (with a couple of provisions for manual-TRANS starter mounting
locations)
5. suitable bolt on cast bellhousing for 13Brew/20B
auto tranny rear housing (using standard at starter as provided in those
models)
6. Planetary reduction gear type design
------------------------------------------
7. RATIO FOR INITIAL VERSION WOULD BE 2.86; SUBSEQUENT RATIOS COULD BE AS
HIGH AS 3.35 (approx).
8. optional provisions for beta range props
9. PROP CONCENTRIC WITH E-SHAFT CENTERLINE
10. Weight around 40lbs
11. Fully tested with a metal prop and for torsional vibrations on 13B and
20B
12. GEARBOX AND PROP COMPLETELY ISOLATED FROM ENGINE TORSIONAL EXCITATION
------------------------------------
13. oil cooled
14 2500 LB THRUST CAPACITY, suitable for both pusher and tractor
installations
15. Capable of tested continuous loads of 450 lb-ft torque and 400hp
16. maintains the normal prop design direction of rotation
17 and I probably forgot some other stuff
I personally would not be interested as we are doing an electric CS
prop with carbon fiber blades. That is lighter and has less rotational
inertia than a metal CS prop and probably cheaper as no $1500 prop
governor is required.
Also the price of Tracy's PSRU with six pinion planetary is about
$3000 and weighs less than 40 pounds I think. Not to mention the
10,000 plus hours experience we already have with the Ford planetary.
Paul Lamar
marc wiese wrote:
OK, Paul,
Just trying to gauge the interest. It seems that the theory of the
durability of the loads on the planetary gear set still have to be proven.
Like I indicated, it would have to be a stout unit, capable of punishment,
proven by theory and testing.
What theory is to be proven? The theory was proven 100 years ago at least.
As I said we have tons of experience with the Ford planetary set.
The ones that have failed are due to the lack of helical gear thrust
bearing and improper lubrication for the sun gear. Tracy has addressed
both these issues in his new box. His first Ross gear box lasted 650 hours
with out these features and some in gyros have well over 1000 hours.
The vast majority of successful aircraft engines designed in the
last 65 years have planetary gear boxes. That includes all the
large radials and the very popular Russian/Polish 360 HP radial
now used in a lot of home builts and Yaks. That also includes most
turbo prop engines. There is no beating a planetary on torque
to weight ratio.
This is a 1200 HP version of the PT6 planetary gear box.
If you want something even heavier duty design something around
the Allison planetary automatic transmission found in some GM very heavy
duty trucks.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org