marc wiese wrote:
Paul et all,
With the near-demise of Ross, the non-approachablity of Marcotte, and the
acknowledged leadership of Tracy Crook and the Powersport designs currently
out there for Mazda rotary engines, might it be possible to find who
would/might be interested in purchasing a psru that has capability of, but
can be sold with or without the following [as the basic design will be
standard (all this is preliminary)]:
1. hydraulic cs operation
2. hydraulic pad mount for governor
3. integrated mount-mount provisions on cast bellhousing
4. suitable bolt on cast bellhousing for 12B/13B standard tranny rear
housing (with a couple of provisions for manual starter mounting locations)
5. suitable bolt on cast bellhousing for 13Brew/20B auto tranny rear
housing (using standard at starter as provided in those models)
6. Planetary reduction gear type design if suitable in tests/calculations
7. reduction ratio can be as high as 2.85/1
8. optional provisions for beta range props
9. Very little, if any offset depending on design
10. Weight around 40lbs
11. Fully tested with a metal prop and for torsional vibrations on 13B and 20B
12. isolated damping type design
13. oil cooled
14 suitable for both pusher and tractor installations
15. Capable of tested continuous loads of 400'lbs torque and 400hp
16. maintains the normal prop design direction of rotation
17 and I probably forgot some other stuff
IF the possible price for such a unit is proposed to be around $4000.00,
would you be interested?
I would like to find how many people might consider purchasing such a unit.
email Cardmarc@midsouth.rr.com and put "new psru" in the subject line of
your message.
Marc Wiese
I personally would not be interested as we are doing an electric CS
prop with carbon fiber blades. That is lighter and has less rotational
inertia than a metal CS prop and probably cheaper as no $1500 prop
governor is required.
Also the price of Tracy's PSRU with six pinion planetary is about
$3000 and weighs less than 40 pounds I think. Not to mention the
10,000 plus hours experience we already have with the Ford planetary.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org