Subject: emergency fuel pump shut-off
From: ACRE NL
Date: 7/30/2001, 7:42 PM


Andy Hecker wrote:

Gents,

   Why not wire the fuel pump(s) thru their own switch (main pump, boost
pump) then thru the master?  Standard emergency checklist - fly the
airplane, decide where you're going to land and go there, secure the
engine,
flaps when the time comes, master off before you touch down?

   Andy


"James T. Phillips" wrote:

Yes, thats just about what I meant, thanks for stating it clearly  : )
James

Ken Powell wrote:

I see a real problem with this plan - that is when things go so wrong that there is no longer a 'plan' or time to take any preventive actions.  I know, we should never get ourselves into a mess like this but???  For example, you have just arived at your home airport after flying 6 hours from OSH.  The winds are 18 MPH at 90 degrees to the runway and you are very tired.  You can normally handle this with no problem, but this time things go terribly wrong and you loose control of the aircraft and depart the side of the runway and hit a ditch, shearing the landing gear, breaking the motor mount and breaking the fuel lines.  What happens now?  You get 1 guess what a hot rotary exhaust and a stream of gasoline become!  My point is that a fuel cutoff is very necessary.  Maybe one of the auto units will work, maybe not.  Maybe an oil pressure switch with an overide is the answer.  I am years away from flying, but I will have a solution before I fly.  This is a show stopper for me b!
ec!
ause it e
xceeds my personal comfort level.  I don't plan to have an accident, but I admit that I have screwed up before (motorcycles, not airplanes).

Thanks,

Ken Powell
kenpowell@aristotle.net 


The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org