Ken Powell wrote:
I see a real problem with this plan - that is when things go so
wrong that there is no longer a 'plan' or time to take any preventive
actions. I know, we should never get ourselves into a mess like this
but??? For example, you have just arived at your home airport after flying
6 hours from OSH. The winds are 18 MPH at 90 degrees to the runway and you
are very tired. You can normally handle this with no problem, but this
time things go terribly wrong and you loose control of the aircraft and
depart the side of the runway and hit a ditch, shearing the landing gear,
breaking the motor mount and breaking the fuel lines. What happens now?
You get 1 guess what a hot rotary exhaust and a stream of gasoline become!
My point is that a fuel cutoff is very necessary. Maybe one of the auto
units will work, maybe not. Maybe an oil pressure switch with an overide
is the answer. I am years away from flying, but I will have a solution
before I fly. This is a show stopper for !
me b!
ec!
ause it e
xceeds my personal comfort level. I don't plan to have an accident,
but I admit that I have screwed up before (motorcycles, not airplanes).
Hans Conser wrote:
Frangible fittings would make a big difference in this example.
Hans
mike h wrote:
My greater concern would be the failing of the switch/relay when you need it
- ie a TOGO situation, you almost botch a landing and need throttle to get
climbout again. Could put you in the trees quickly :(
Mike Harrington
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org