Don Dunbar wrote:

Paul I have sourced 3 x C6 six pinion gear sets. These are all new as the guy imported them from the US.
He refers to these gear sets as E40D which date back to 86. He advised me that the gear sets pre 96 are no good as the teeth hardness is laking.
He also has 2 x R410 gear set which are from the electronic box manfacture after 1998.
Can you confirm any of this information.
This guy has a transmission rebuild company and a tow truck bisiness. He also told me that he imported some of these gears for his tow trucks that have have a higher ratio, I mean 2,19 plus say 2.5 to 1 ?
Reagards Don

Yes. The E4OD is similar to the C6. I don't know about the hardness but
you can always check that. Best thing is take pictures with a digital
camera and send them to me along with their dimensions as some C6 parts
look the same but are of different dimensions. Here is a picture that 
illustrates that fact.

If we are lucky Tracy will give us some part numbers.

BTW The digital camera I recommend in case you don't have one is the 
relatively low cost Sony Mavica FD73 with floppy and 10X optical zoom.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org