Subject: Rotary CHT Gauges
From: ACRE NL
Date: 8/1/2001, 7:51 AM

Ian & Irene Beadle wrote:

Standard spark plug thermocouples work OK. Just relieve the hole on one side to get the wire out. Bit superfluous as you are only measuring water temperature at that point. ie about 3" from the water temp. sensor!
Ian.
beadles@webace.com.au

You need to drill a very small hole next to the leading spark
down to within 2 mm of the combustion chamber and insert a thermocouple
from Omega.com.

That is the hottest spot in the engine. Don't do it with the
engine assembled.

Paul Lamar

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

rotor-house-heat-dist-d.gif