Subject: Don Dunbar canard fuselage
From: ACRE NL
Date: 8/2/2001, 7:33 AM


Roger Robertson wrote:

Don,
Great Fuselage Shape. Carbon cloth and Nomex is definitely the way to go
and better
than fiberglass to work with too. Vacuum bagging has come a long ways
too. Now if
we could get some prefabbed Wings and Strakes we'd still be under the
51% rule and
could spend more time on the details and engine.  I heard a rumor that
WingCo was
prefabbing wings for Velocity before they got into their own blended
fuselage
design.
Roger Robertson, TX,  but not by choice.

Don Dunbar wrote:

There a few companies in the US making the wing's moulded in two halves and
glued together after the spar is glassed in.
I will start the wings and canard moulds next week for the Cozy MK4.
I rent an Eagle 150 at my local airport, this plane is constructed the same
way but they have not used carbon fibre. One of the intersesting thing's on
the wing's alierons < flaps , rudder and all trailing edges is that they
moulded a flat section on the last 1" to glue upper and lower section
together and made no atempt to fair this in with filler.
I will post my progress on the project.
Regards Don

The latest hot tip on canard winglet drag is radius the ends of the 
wings were they attach to the winglets. Reduces the intersection
drag. See the winglets on the Gulfstream IV for examples.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org