Subject: emergency fuel pump shut-off switch
From: ACRE NL
Date: 8/2/2001, 7:38 AM


Bill Freeman wrote:

 Nice thought, but in my experience patent info is general, not
specific, such
as the actual G load and direction that trips it.  OTOH, there might be
some
thing there.  Paul knows a lot of folks in the auto industry, so maybe
he
can ask somebody to find out how some of these things work and what
the perf specs are.   If we could find a 5 G "bump" shutdown switch, esp
if acts horizontally rather than vertical, it could be useful.  The
comment
from
somebody on a switch from an old ELT was pretty good, and if you could
find one of these and see how it works, it might work.   Seems like some
of them used rolamites which are neat G switches, but are probably rare
as hen's teeth.

Bill Freeman

I'll try.

I think the way they work is a ball bearing suspended from two magnets.

Paul Lamar

Neal Scherm wrote:

Hey all,
What about an automobile air bag switch. Much more reliable than the fuel
cutoffs. They are designed to ONLY go off in a certain situation and at
higher G's. IE head-on, not a side or vertical G load.
Just a thought,
Neal


The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org