Subject: meet in the east pt 2
From: ACRE NL
Date: 8/2/2001, 8:25 AM


Mike, you got enough clout to close the straight away so Ed can land?
How long is the straight?

Paul Lamar


Not sure... www.virclub.com and look at the track map :) But the area is
pretty heavily wooded, so there would not be much runoff.

No, I don't have enough clout for that :(

But if it's a rotary airplane, I'll talk to Dave at MSCW and see what
they
can come up with. There should be some bigwigs from MNAO there, might be
great publicity.

Also, there are probably a few private strips in the area - I've seen a
LOT
of GA small fry up there.

Mike Harrington


Heck Ed could land a 747 on this.

Paul Lamar


Ed Anderson wrote:

Hi Mike, Paul

  Paul is correct, the back straight on the South Course would be a piece of
cake for my aircraft to Land on.  I can't tell how long it is (looks like at
least 1/2-3/4 mile) and I regularly take off and land on a 2000 ft surface
with no problem.

  Would of course need to get permission from proper authorities at the
track.  Have someone on the ground with a radio and of course have that
portion of the track closed for the landing and takeoff.  Looks like I could
park in the Paddock area.

Would be willing to do it assuming you think it worth the effort.

Ed Anderson

What a spectacular publicity coupe for all concerned. VIR, Mazda,
Mazda dealers, the club... everybody. Contact the local TV station,
Speed Vision and newspapers and Mazda dealers to put up insurance money. 
Insurance cost would be well worth it.
Perhaps you may need to sign a release Ed.

If all else fails several passes at 1000 AGL would be legal.
Perhaps 500 AGL if there is just farm land under you and you
are 500 feet laterally from the crowd.

I might even show up :-)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org