<< Paul/Lynn
> This is the first, I have heard of using dual springs under the Apex seals.
> Is this common? Will this make an Apex seal less chance of sticking? What's
> the pros and cons of using two versus one spring? Is there different spring
> rates?
> Rich Gillen
I don't know if it is common to use two springs on the ceramic seals or not.
The shorter spring looks like a cut down stock spring. If so the rate would
be very high.
It is a real bear to compress for installation. The ceramic seal feels
diamond hard compared to the carbon seal, so the added spring pressure my not
add much additional drag. I think it would be a mistake to run two springs on
a carbon seal. They machine easily with silicon carbide paper, and I think
would wear out quickly. I have never seen a running engine stick a seal
without a catastrophic failure involved. I have torn down donated engines and
found stuck seals caused by carbon build up and rust. But never a running
engine. I just got my new Racing Beat catalog. This is a must have for Mazda
fans of any stripe. This thing will save you money and maybe more. If you
don't have one, there are things you don't know about rotaries.
Lynn E. Hanover.
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org