Worked on my oil pan today.
Made a few improvements to the pan in the drawings.
Mainly more room for the pan bolt heads along the back rail.
The wood support was needed so I could cut the holes with 
hole saws and drill the rails.

Bruce Frank will make it without the holes for $150.
Bruce Frank <bafrank@worldnet.att.net>

Will work equally well with the rad under the engine on a pusher
or a a puller.

The front oil pickup has me baffled. It is from a 88 turbo
engine. It has what appears to be four very small helmholzt resonators.
For what reason I have no idea. Mazda knows something about this 
they are not saying in any of the SAE papers I have read.

The back oil pickup is from a 87 normally aspirated engine.
The oil pickup will need to be modified to fit this pan.

Weight is about four pounds. Not much of a weight saving but
that includes the air oil separator plate which normally would be 
missing. This top plate, if made thicker, could also serve as a Tracy Crook
style motor mount bracket.

The pan holds 3.9 quarts. There should be another half quart in the
rotors and another quart in the oil cooler and plumbing.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org