Subject: met in the east pt 2
From: ACRE NL
Date: 8/3/2001, 7:22 PM


Ed, my home # is 336 856-7768, I'm usually available after 7 or so at
night.

Any relation to a Justin Anderson in Charlotte?

If you are really serious, I will pose the question to the event
organizer
about aircraft use of track - if they can support a 225mph Ferrari 333
SP
I'm sure it can support a RV-6. Probably would be great PR for the Mazda
NAO
Folks that will be there. How does one handle landing on a non ATC
strip?
Are grass, private strips and the like required to be registered with
the
FAA, or can you just mow your field and land a small plane in it?

Never had to find out about that, the USAF generally doesn't ask when
they
land out in the boonies :)

The toll of course will be a ride in the RV - maybe we could get some
aerial
shots of VIR with cars on. :)

Mike Harrington



Ed Anderson wrote:

 Mike,

    No Mike, not kin to any Anderson is local area, although my ancestors
(about 4 generations ago) lived in Surry County, NC just across the boarder
to the west of you.

    I've just checked with my friendly local FAA guy and as long as I don't
buzz local homes and the race track guys are OK with it there is no problem
with the FAA.  This would not be considered a landing strip. I would simply
be performing an  "off field" landing.  About the only thing that would
crimp the event is uncooperative weather.

Procedure would be what ever we can work out.  I propose something like this
(assuming of course the race track guys approve)

1.  Specify which area of the track will serve as a landing and take off
area (South section Back Straight looks perfect).
2.  Acquire/borrow a VFR radio capable of receive/transmit on 122.75MHZ
3.  Identify a date/time for the landing (+-15 minutes) also where I am to
park and date/time for departure.
4.  Acquire/borrow a VFR radio capable of receive/transmit on 122.75MHZ
5.  Ensure that portion of the  race track is blocked off (both ends) or
otherwise make certain no traffic on it during that time.
6.  I will arrive over the VIR race track at 1000 ft and make radio contact
with you Mike to make certain all is A OK.  I will let you know which
direction I will be landing depending on the wind.
7. Upon receiving your response that everything is ready for Go I will set
up a left hand pattern (standard) and prepare for landing.
8.  You will hear me make calls such as Down Wind, Base, On Final Approach
just to keep you informed
9.  After touch down I will (turn around if necessary) taxi to the South
Paddock or other suitable area off the raceway.  I would prefer to stay on a
hard surface as the RV is a bugger to drag on grass - but, possible with
assistance.
10.  I would propose to take the cowling off for those interested in viewing
the engine compartment and stand ready to answer any questions as long as
there are those interested.
11.  Upon departure time, again block off raceway section for approx 15
minutes and I will make my departure.  Fly over once and head home.
12.  I would propose giving you a ride at a local airport at a different
date time rather than trying to do it and land and take off a second time
from the raceway.

That's my initial cut at it.  The only thing that would put a crimp in the
plans would be weather.

I'll give you a call next week to see how it looks.

Best Regards

Ed Anderson
704-821-7595
Matthews, NC


 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org