marc wiese wrote:
Answers for FD injectors!
Need some help here as I have conflicting information-
The primary injectors are supposedly rated per book at 550 cc/min, 165
floz/min, and 550 ml/min (see TD section!)
The secondary injectors are supposedly rated per book at 850 cc/min, 255fl
oz/min, and 850 ml/min.
Stock primaries are 550cc/min and secondaries are 850cc/min.
What colors are the injectors per their position?
My reddish shorter ones tested at 230 cc/min (after cleaning, test pressure
43 psi, 6 ms pulse, grav wt .75)
The brownish longer ones tested at about 180 cc/min (same spec)
Is the book mixed up on the specs or did the test not test max performance
of the injectors?
I think 850cc/min is with the injectors tested full open, not a 6ms pulse.
What is the correct color of the primary and secondary injectors? I don' t
want to mix em up when I install them!
Red tops for the secondaries, light purple (these sometimes look like
light brown when older and faded) for the primaries.
I'm confused.
PS. The parts book does not seem to show the big o ring that sits in the
primary center housing hole upper step. As I look at it, it seems to
You mean the one between the housing and the primary fuel rail? I think
the part numbers might be swapped in the book. I needed these and surfed
Mazdatrix.com (they have photos) for the parts and called and ordered them.
I also verbally described their location to the salesperson to make sure I
got the right parts.
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org