Subject: Dual Thermostat on 20B
From: ACRE NL
Date: 8/5/2001, 6:59 PM


 > Paul, this is the same kind of thermostat like the one from my 13-B
 > Cosmo. You
 > did the surgery in the water pump. I didn't like it. It was huge and
 > complicated.
 > Bulent


 You mean the hole was huge. What is wrong with a bigger hole?
 A bigger hole cuts down the resistance to water flow which is good.
 Here is a picture of your pump before I sent it to you and after
 I cut it down. What is complicated about it?
 You mean it is hard to do. You don't need a mill to do this.
 It can be done with a die grinder and a hack saw.

 You can't please all the people all of the time :-)

 Paul Lamar


Interpreting it differently,
I read Bulent as saying he didn't like the ORIGINAL pump with the dual
thermostat housing as IT was large and complicated.

Bill Schertz
KIS Cruiser #4045

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org