Don Dunbar wrote:

Hi Paul,
I don't think there will be a problem getting checked out for the Cessna 172. I am going out to the air field tomorrow and I'll get all the details and cost.
Paul on your PRSU drawing you show the outer planetary gear drilled and bolted to the propshaft. How did Tracey do his shaft.
Regards Don

Tracy used the stock splined bulkhead shown here in the upper
right corner  and had splines cut
on his custom forged output shaft and prop flange combination
to mate.

Power Sport uses the bolted bulkhead to the prop shaft trick.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org