The front oil pickup has me baffled. It is from a 88 turbo
engine. It has what appears to be four very small helmholzt

resonators.

For what reason I have no idea. Mazda knows something about this
they are not saying in any of the SAE papers I have read.

The back oil pickup is from a 87 normally aspirated engine.
The oil pickup will need to be modified to fit this pan.

Weight is about four pounds. Not much of a weight saving but
that includes the air oil separator plate which normally would be
missing. This top plate, if made thicker, could also serve as a Tracy

Crook

style motor mount bracket.

The pan holds 3.9 quarts. There should be another half quart in the
rotors and another quart in the oil cooler and plumbing.

Paul Lamar

Ken Gillanders wrote:

Paul,

You may be surprised to know that I have that same pickup with the
resonators out of a 1986 13B normally aspirated. Cannot be related to

turbo

vs NA. I know for a fact this was a '86 because I pulled it out of the

car

and I looked at the door plate.

Ken Gillanders

Not only surprised I am dumbfounded :-)

Paul Lamar

I'm very curious,.......never heard of or seen one.
How about a couple of pictures.
                               Thanks.........Butch

It is the one nearest the camera Butch.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org