One miscellany point - you'd probably need to come in counter-race, IE
into
the hairpin on the course map. That hairpin is known as 'oak tree'
because
of it's predominant feature :)
What's actual landing distance and speed of the RV6?
Mike Harrington
In looking at the VIR track, that is the way I would prefer as well. that
would put me on a heading flying from the south to the north. Hard to tell
from the map, but looks like a true heading of 335 degrees. The only
reason I would need to land the opposite direction would be if the wind was
blowing from the South. In that case I would propose touching down at the
North end of the south courses (Turn 1 on the south course map) that would
be on a heading of 135 degrees.
I hold a speed of 80 mph on final approach until just before touch down when
I let it slow to around 70 mph. I have made an emergency touch down and
stop from 80 mph in 300 ft distance (left some rubber on the tarmac from
that stop {:>)). However, I don't intend to do that as a matter of practice.
So figure 2000 ft for a comfortable landing distance, but could do it in
1500 ft if need be.
Ed Anderson
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org