Subject: meet in the east pt x
From: ACRE NL
Date: 8/5/2001, 10:40 AM


OK, it's 0030 EST and I just got to check all my email. :(

Here's the deal -

given the FAA says it's OK (done)

 **  I agree, Mike, no problem with FAA

 > > Someone needs to:
-call local Mazda dealers and/or MNAO for insurance sponsorship
-call MSCW
-call (possibly conference call w/ MSCW) VIR

I'd prefer to know what we can expect for insurance support

...SNIP...

** I do carry liability insurance on my aircraft and will have to check the
policy, but doubt if they mention landing areas. Aircraft commonly  land on
dirt strips, roads, mountain edges, valleys, etc.

 > > And, we need a radio.

Times would be somewhat of an issue - Ed, can you fly at night? You'd
probably have to arrive around 0800 and leave after 1800. Of course, you
could arrive Saturday night at 1800 ish, and we could put you up
somewhere
either in Danville or at a member's home, then return on Sunday. The
driver's school is both days. Expo on Sunday only.

** Mike, I would prefer not to fly at night especially into something like a
race track - no runway lights.  Saturday night around 1800 would be OK still
plenty of light and before offical sunset. Is camping permitted on the
Racetrack? I can bring my small tent and sleeping bag.  I am retired so no
problem if I could not get out Sunday evening as long as I could Monday
morning.

Also, what's your wingspan? I'm 99% sure you could make it into the
south
paddock, but the spectators would all be in the North paddock.  Need
span to
see if we can get you through the gate :)

** My wingspan is 23".  As long as I    could land/takeoff on the South
Paddock back Straight, I could taxi to the North Paddock and park there with
no problem.

Another issue is fuel - there is usually 104 race gas and Cam-2
available at
the track. Usually no 93 pump gas. Your requirements/quatities?

** I usually use 100 LL, but the 104 would work just as well. Actually, I
will have sufficient fuel so that no refuling will be necessary at the
track.

Alternate would be danville airport - I will have a cell (as well as the
radio) so we could get someone out there to give a ride in.

** Danville is fine as an alternate airport, but if unable to fly and
display rotary engine in aircraft at racetrack, no certain there is much
point if flying up there.

Was joking (mostly) about the 'toll' (ride) - but I might come out your
way
and take you up on that later :D
** Anytime, Mike

Let's make it happen!

** I am more than willing.  Just give the OK once the wickets are overcome

I will give you a call early next week.

Best Regards

ED

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org