Subject: A Stock Turbo Upgrade from Turbonetics.
From: ACRE NL
Date: 8/6/2001, 12:27 PM


This is what we car guys refer to as a hybrid (T3/T4) turbo. I have driven
one (T04E on stock T3 exhaust) and it is a noticeable increase of power.
Haven't gotten him to a dyno yet, but his car pulling 7-8 PSI of boost felt
faster than mine at 11 PSI. Of course mine is louder :)

For serious power, you need a serious turbo - and hybrids aren't that. But a
hybrid properly tuned can make 300 HP in a car - a lot of Japanese tuners
are doing just that.


FWIW, this is basically the upgrade I will be getting as the motor goes back
together; however I am going to try to find the funds for a ball-bearing
CHRA.

Mike Harrington

A Dr.XXXX at the NASA booth at OSH  told me the ceramic ball bearing races
go out in about 500 hours. He was advocating air bearings however.
He admitted that high gyro loads would fail the air bearings
right at the moment. I think I will stick to the good old tried
and true full floating dynamic oil film bearings for awhile.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org