Subject: Dual Thermostat on 20B
From: ACRE NL
Date: 8/6/2001, 8:19 AM


Paul, this is the same kind of thermostat like the one from my 13-B
Cosmo. You
did the surgery in the water pump. I didn't like it. It was huge and
complicated.
Bulent


You mean the hole was huge. What is wrong with a bigger hole?
A bigger hole cuts down the resistance to water flow which is good.
Here is a picture of your pump before I sent it to you and after
I cut it down. What is complicated about it?
You mean it is hard to do. You don't need a mill to do this.
It can be done with a die grinder and a hack saw.

You can't please all the people all of the time :-)

Paul Lamar


Interpreting it differently,
I read Bulent as saying he didn't like the ORIGINAL pump with the dual
thermostat housing as IT was large and complicated.

Bill Schertz
KIS Cruiser #4045

Bulent Aliev wrote:

I'm sorry for the misunderstanding Paul,
I like the water pump and the work you did. Didn't like the thermostat the
way it was originally.
Bulent

Ok Bulent. Thanks for clarifying. I am a bit sensitive which is different than
being insensitive :-) Which is like; I can dish it out but I can't take it :-)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org